Description
- Standard 2 participants mode
- Possible to make 4 participant positions with shared microphones and loudspeakers Loop through with a DICENTIS cable
The Flush base device 2 is intended for use in flush mounted solutions. It enables the addition of a number of functions, making it suitable for
chairpersons and participants. Each input can be assigned its own seat number, allowing the DCNMFBD2 to serve two participant positions.
With the dual use license you can increase the maximum participant positions to 4, with each position sharing their microphone and loudspeaker.
Functions
• The DCNM-FBD2 creates flush-mounted positions with the Flush panels.
• The device can be mounted under the under tabletops or in the arm rests of chairs.
• It enables loop-through to other Flush base device.
• The device has two audio inputs which connect to two DCNM-FMCP when a DICENTIS Flush microphone is used.
• The green/amber LED indicates the unit status. Interconnections
• Two RJ12 connectors to connect button modules. Each connector serves one participant, but multiple modules, like DCNM-FMICB and DCNM-FPRIOB, can be daisy-chained on one port.
• Two balanced audio inputs to connect a DCNMFMCP (3 pole terminal block).
• Two RJ45 compatible connectors for system
communication and power.
• Two loudspeaker outputs to connect a DCNM-FLSP
(2 pole terminal block).
| Dimensions (H x W x D) (in) | 1.26 x 3.90 x 7.90 in |
| Dimensions (H x W x D) (mm) | 32 x 100 x 200 mm |
| Mounting type | Wall-mounted |
| Operating relative humidity, non-condensing (%) | 5 – 90 % |
| Operating temperature (°C) | 5 – 45 °C |
| Operating temperature (°F) | 41 – 113 °F |
| Power consumption (W) | 5 W |
| Storage temperature (°C) | -5 – 45 °C |
| Storage temperature (°F) | 23 – 113 °F |
| Weight (g) | 656 g |
| Weight (lb) | 1.45 lb |
There are no reviews yet.